Skip to main content
Free Shipping  Free Shipping & 17 Free Extras for orders over $250

Filling Existing Walls

Insulating Existing Walls with spray foam insulation

If you’re renovating, your structure probably lacks good insulation.

Most buildings, even newly built, don’t have adequate insulation.  And VERY FEW have an air seal that prevents drafts, allergies, and high energy bills.

You want spray foam insulation in these walls, but normally spray foam is sprayed as an expanding seal.  In these cases, both sides of the wall are up and you want to get an expanding foam inside WITHOUT tearing down 1 side or the other.

Here’s how to do this:
If there’s nothing in the walls, read Slow Rise below
If there’s fiberglass in the walls, read Dropfill below

Slow Rise Spray Foam Insulating (Retrofilling)

Slow Rise Insulating (Retrofilling)

Does your home have nothing in the walls?

You’re not alone. Many of our homes and buildings have no insulation at all.

Sure, builders saved money on materials and labor, but now you pay huge energy bills.  That’s not great.

You need a tight air seal in your walls. A tight air seal saves energy, provides a healthier home, less noise, and fewer pests.

But you also don’t want to take down the interior walls to insulate them and stop the pain.

Here’s a quick and easy way to fix your empty walls in a few short hours.

It takes only a few minutes per stud bay to:

1) drill a few easily patched holes

2) Fill the cavity with Foam it Green Slow Rise

3) Move to the next bay.

Doing it this way makes QUICK work of a wall or 10. And in a few hours you completed a challenge millions of American homes still face.

Use Foam it Green Slow Rise kits to get amazing results:

  • The ONLY Slow Rise safe for use in homes. Top Class 1 Fire & Mold Retardant. No VOCs (Volatile Organic Compounds) or Formaldehyde.
  • Yellow + Blue = Green, so you know the foam is mixing before it goes behind the wall. No guessing if it will cure. Without this visual indicator, it’s very hard to tell if you’re filling your walls with a mess that will never cure. That can lead to soaking through your drywall, chemical smells, or worse.
  • Highest R-value per inch saves money on reduced energy loss (R-7 per inch).

Watch out for the many companies selling non-fire-rated slow rise spray foam. You DO NOT want to fill the walls of your home with spray foam that isn’t fire-retardant.

Check out this video on how to maximize your results.

Using Foam it Green Slow Rise formula makes it quicker and MUCH easier.  Why? The color coding, the class 1 fire retardants, the step by step instructions and the anti-microbial formula all make it much easier to succeed.

Buy the right product to do this right now

See Foam it Green Slow Rise Spray Foam>>

Questions? Call us at 1-800-516-0949

How to Insulate Closed Walls with Fiberglass Inside

Foam it Green Open Cell DropFill Process™

Insulate Existing Walls Containing Fiberglass

Until now, insulating closed walls meant tearing out the drywall to add spray foam, or having a company drill unsightly holes through the outside of your home.

Now, the DropFill process makes it easy to add spray foam insulation to existing walls that already contain fiberglass.

One-Hole Under-Baseboard Installation
  • You don’t need expensive contractors tearing your walls apart
  • You can be a true novice – No expertise required
  • Super simple because you don’t need to remove the fiberglass
Uses Proven Foam it Green Solutions:
  • Yellow + Blue = Green system makes installing simple
  • Unique Class 1 fire retardant & anti-microbial formula