Test PE wizardEstimate your kits
We understand that every individual has a unique problem to solve for
their project. That's why we offer guidence to help you find the perfect
kit(s) for your specific project. In order for us to help you the best we
can, please answer the following questions as accurately as possible:
To figure out the amount of area that you need insulated, calculate the length x height of each wall and/or each cieling and add up the totals.
For example: Wall A is 15' long and 15' high, making it 300 sq ft. Wall B is 10' long and 10' high, making it 100 sq ft. The total square footage needing to be insulated would be 400 sq ft.
Most of our customers spray 1-2 inches of Foam it Green foam insulation and then add fiberglass batting to fill the rest of the stud space... Why? Well, Foam it Green insulation has a very high R-Value (The higher the R-value, the greater the insulating power) of 7 in just one inch, which is nearly double the R-value of fiberglass insulation. 1-2 inches of Foam it Green is enough to seal out air and moisture, and help prevent mold and rot, making the fiberglass batting much more effective. Just 1-2 inches can save you up to 40% on your energy bills!
Because measurements for a project are never 100% exact, it's important to account for a little more than necessary, in case of errors such as applying a little too much in some areas or miscounting of the total square footage. The recommended allowance is 20%, but the final decision it is up to you. Please pick either 0%, 10%, or 20%.
RECOMMENDED FOR YOUR PROJECT...
Based on your selections on the previous page, the right product for your project is:
Foam it Green
Based on the size of your project you indicated (), you will want to purchase these Foam it Green Kit sizes to get just the right amount of product to get the job done, without paying for more than you need:
Foam it Green 602(sq ft)
|0||Foam it Green 202(sq ft)|
|0||Foam it Green 102(sq ft)|
|0||Foam it Green 12(sq ft)|