The Solution for Closed Walls with Fiberglass Inside
Foam it Green Open Cell DropFill System™
Do you have walls that are filled with fiberglass but still have drafts or high energy bills? Do you need better insulation but can’t figure out how to do it without making a huge mess?
Insulating closed walls with existing fiberglass used to be either impossible or a nightmare. Now, with the DropFill System™, you don’t need to destroy your inner walls trying to remove the existing fiberglass. And you don’t need someone drilling ugly holes on the outside.
It’s so easy, you don’t need to be a DIY Superstar to be able to fix this very common challenge in just hours.
Below are the simple steps in the DropFill System™. Still got questions? We’re always here to answer your questions if you need any additional information. Give us a call at 1-800-516-0949.
Insulate Existing Walls Containing Fiberglass
Now, the DropFill System™ makes it easy to add spray foam insulation to existing walls that already contain fiberglass.
One-Hole Under-Baseboard Installation
- No expensive contractors tearing your walls apart
- No expertise required, designed for first time users
- No removal of existing fiberglass means big savings
Uses Proven Foam it Green Solutions:
- Yellow + Blue = Green system makes installing simple
- 24×7 support – we’re always standing by for you
- Unique Class 1 fire retardant & anti-microbial formula
How Easy Is It? Here are the Steps:
Remove, and then drill one 2” hole per bay under, the baseboard (or above it if you prefer).
Feed the patent-pending DropFill System™ up the first cavity BEHIND the fiberglass, trying to keep it as centered as you can.
While foam will spread to fill the space allotted, it is ideal to fill from as close to the center as possible.
You’re ready to start filling your first cavity! This product is uniquely designed to fill the cavity (already containing fiberglass) correctly if you follow the easy metering system in the instructions.
Pull the trigger. Follow the unique metering system that comes with your DropFill System.™ Then, remove the system from the wall and pop the nozzle off the gun.
We’re always here to help you be successful. Feel free to call us anytime at 1-800-516-0949 with project or product questions.
Note: There are always minimal risks that come with this type of project, regardless of type of foam or company. If you don’t follow the easy metering system, or if your walls are previously damaged or contain fillers other than fiberglass, there is a chance that you may not fill the cavity fully, or that a blockage could occur, pushing out or damaging the drywall or plaster.
If you have concerns that your fiberglass may be compromised (wet or moldy due to previous leaks for instance), you may want to remove a larger section of drywall and inspect it before deciding which method of spray foam to use. If your fiberglass needs to be removed, then you’ll want to use our Slow Rise System instead. Slow rise is intended to fill an empty wall cavity. The DropFill System™ is specifically designed for walls that do contain fiberglass.
Calculate How Much Foam You Need:
Enter the Square Footage
|Total Square Footage:||160|
Allow for Project Overages
|DropFill System 1202 Kit:||0||$0.00|
|DropFill System 402 Kit:||0||$0.00|
|Total # of Kits:||0||$0.00|
|If you need 6 or more 1202s, get special bulk pricing here or call us at 800-516-0949.|
Results based on theoretical yield.
Step 2 Decide Thickness of Foam You Need
No products were found matching your selection.