Skip to main content

Foam It Green 602 Super Pack Closed Cell Spray Foam Kit

The best price. The best insulation. The best support. The best product.  – Steve P., Saint Paul, MN

Stops Drafts, Deadens Noise, Resists Mold & Pests, Fire Retardant
Covers 602 board feet | R-value of 7 at 1″

Proven in Over 35,000 Homes

  • Cold weather safe, won't freeze in transit
  • Installs easily on a Saturday morning
  • Get savings of up to 40% off energy bills
  • 17 FREE extras make preparation easy
  • Re-use – stopping & starting is no problem

In addition to your 17 extras, this Super Pack also includes:
Respirator w/ cartridges, drop cloths, thermal leak detector, & headlamp.

Call us: 800-516-0949
Project Estimator >>

Available for Immediate Shipment

FREE Shipping & 17 Extras Free Today!

Foam it Green 602 Super Pack

The world’s only closed cell spray foam insulation with:

  • Class 1 E84 Fire Retardant included.
  • Blue and Yellow make Green foam for peace of mind of proper mixing even in a blind cavity fill.
  • ASTM G21 Anti Microbial Formula.

Product Specs:

  • Approximately 602 Board Feet (602 Square feet at 1 inch thickness) of closed cell spray foam insulation.
  • R-Value of 7 in Just 1 inch – 97% Closed Cell Foam. The best wall, basement or attic insulation.
  • Class I E-84 Fire-Retardant – meets building code spec.
  • Expanding sealant creates Class 3 vapor retarder, controls air flow, and creates a tight building envelope.
  • Shelf Life: 13 Months unopened, 1 Month Once Opened.

Purchase Includes:

  • Includes a pair of isocyanate resistant gloves, 15′ hose assembly w/gun, 10 nozzles and 3 fan spray tips- everything you need to complete your insulating project.
  • Comes with Easy to Read Instructions and Foam Like a Pro Helpful Hints.
  • Includes 24/7 Customer Support so You Get the Results You’re Really After.
  • 17 Accessories Free! Includes Nozzles, Fan Spray Tips, a Tyvek Suit, Goggles and Gloves. All You’ll Need to Foam Your Home.
  • Also included with the 602 Super Pack: Respirator with cartridges, drop cloths, thermal leak detector, and a headlamp.
  • Steel canisters pressurized with nitrogen for foam delivery. No outside source of pressure or power is required.

Product Benefits:

  • Spray foam insulation that’s convenient and easy to use.
  • Get the most control with the best gun in the business.
  • Complete detailed instructions make it quick and easy to foam like a pro.
  • 100% Free of CFCs, VOCs, Penta-BDEs, & Urea Formaldehyde
  • 100% Made in the USA
  • Ships Same or Next Business Day
  • ASTM E-84 Fire Retardant
  • Mold and Pest Resistant
  • Stops drafts, deadens noise
  • As easy to use as spraying a garden hose
  • Stop and start again, re-use with proper prep

Additional Notes:

Setting Up Your 602 Kit

Customer Top 10 Questions & Answers

How is this kit different than a Foam It 602?

In addition to the Foam It 602 spray foam kit, this product also includes a particulate respirator with P100 filters for organic vapors, project dropcloths, a temperature gauge to find the temperature of what you’re spraying, and a headlamp.

What is the R-value?

Foam It Green closed cell spray foam insulation is R-7 per inch. That is double the R-value per inch of fiberglass batt.

Is this a vapor barrier?

Foam it Green is a Class III vapor retarder. Your local code will determine which Class vapor retarder you need. If your code requires a Class II or better, then hang kraft paper (comes in rolls at home stores) after you have sprayed the foam.

Is this fireproof? Is this a thermal/fire barrier?

Building code for living space requires a 15 minute fire barrier. Foam It Green is an ASTM E84 Class I fire retardant insulation, which means it still needs sheetrock or fire-barrier paint if used in living spaces.

What temperature should the foam and surface be when I spray?

Both of the components and the substrate you are spraying to should be between 65 and 85 degrees Fahrenheit for best foam creation and adhesion. Foam It Green 602s come with a temperature gauge on the B tank. If you are spraying in cold weather, artificially heat the surface and tanks. If you are spraying in hot weather, spray in the morning.

Can I spray this on wood? Metal? HVAC? Foam board? Plastic?

Foam it Green will bond to a broom-clean, dry wood, foamboard, metal, and most plastics. The foam may stick to oily surfaces or slippery plastics like visqueen (6ml poly sheeting), but may not bond completely. When spraying to HVAC, it will bond to the surface, but remember not to spray anything that needs to breathe (ie, Plenum).

Can I spray over wiring?

If you have not yet been inspected for your wiring, spraying foam over it will make it hard for the inspector. If you are spraying before the inspector comes, tack the wiring out of the way. Foam it Green creates heat to cure, but it will not melt the coating on romex wiring. Do not put any form of insulation against bare wires like knob & tube wiring of 19th century homes or in junction boxes.

Can I spray overhead?

Foam it Green will stick to surfaces if you spray overhead. Good tips for this type of project are to put dropcloths over anything you don’t want foam to get on, get closer to the surface, balance the pull of the spray trigger to avoid overspray/snow, and do not use the fan spray tip on the end of the nozzle. Only use the cone nozzle when spraying overhead.

Do I need anything else to operate this kit, like an air compressor?

These kits contain everything you need to spray the foam. The pressurized nitrogen makes the foam come out of the tanks, so you don’t need an external power source. This makes Foam it Green kits portable and disposable.

Do I have to use the whole kit on the same day I open it?

Foam it Green 602 kits are designed to be used within 30 days of being opened. If you do not complete your project the day you first use the kit, simply follow the shut down for reuse instruction on page 8 of the instruction manual. Failure to follow these instructions can stop your kit from operating correctly the next time you go to use it, which may lead to the purchase of replacement parts.

How much is shipping?

It depends on which kits you need, how many, and where they are going. You can sign in and put together an order to see exactly what it will cost, or you can call us toll-free at 1-800-516-0949.

What color is the foam?

Foam it Green is the only spray foam kit that dyes the B component blue so when it mixes with the yellow A component, it makes a light green foam. This helps you know you’re mixing the foam on ratio so it will cure properly which saves you time and money! The light green is easy to paint if you want a different color.

Can I return the tanks for refill?

At this time, the Department of Transportation does not allow the refilling these tanks for resale. Please follow the disposal instructions on page 11 of the instruction manual.


  1. Foam It Green 602 Super Pack Closed Cell Spray Foam Kit

    I rarely do a review BUT, the difference in my room after I used your product is astounding. A normal Winter would find the room cold. So cold that we’d keep the door closed all Winter and not venture in. It is now toasty and inviting. I can’t wait to do more projects so I can use your product in other walls of my house.

  2. Foam It Green 602 Super Pack Closed Cell Spray Foam Kit

    I have a two-story home that was built in 1906. It has pier and beam foundation. When it was built there was no subfloor put in at the time. The wood floors were just put in over the floor. The following winter it got to be pretty cold. When it was 25-30° outside I would put my thermostats on 70° and it was probably still 35° downstairs because of the gaps in the floor and the cold air coming up from under the house. I used your foam product and sprayed under the house the following summer. This winter, when it was 28-30° outside and I put my thermostat at 68-70° in the house, it stayed at 68-70° in the house. Great product.

  3. Foam It Green 602 Super Pack Closed Cell Spray Foam Kit

    Just a quick note to say thanks for your great product. I sealed the basement of my old house in Maine from the sill to about to frost level. I had scheduled a contractor to do this work, but due to weather issues, they had been unable to get the job done. I got the work done in one afternoon, and the cost was about 1/3 of what the contractor’s quote was. A local plumber who looked at the work said it was better than the professional jobs that he had seen.

  4. Foam It Green 602 Super Pack Closed Cell Spray Foam Kit

    I used your product on a client’s house. Your system was very easy to use and the directions and all the extra pieces were needed and very helpful. I can say this much, in the Spring, I will be ordering 2 more 602 kits for my house. I have a crawl space under my house, and Foam it Green will be the product I’ll be using to insulate!

  5. Foam It Green 602 Super Pack Closed Cell Spray Foam Kit

    Extremely easy to apply. My first pass was so smooth, I couldn’t believe it. The hoses and spray head are so light it is a breeze to move to places I need to spray. The R-value from the foam, which I need for my A-Frame since my South side will be all glass brings my total R-value load within code. No worrying about sagging insulation in a vertical wall and a lot less effort to complete the wall than with batts.

Add a review

Read More Reviews:

Online | Shopper Approved | Facebook